Foshan manufacturer · Export-ready office furniture
kun@fsbige.comWhatsApp +86 189 2856 2556
Request a Quote ↗
Menu
Home / Products / Workstations
office workstation manufacturer

Workstations pages built for model-based sourcing.

Scalable two-, four- and multi-seat benching systems for team floors. Start with the exact BG model reference, then confirm commercial terms, finish basis, packing route and project inputs on one quotation trail.

ANSWER FIRST

Use workstation pages when the buyer needs a seat map, module scope and floor-release plan, not just an open-office mood image.

This category is for importers, dealers, fit-out contractors and project buyers comparing 2-person, 4-person and larger workstation modules by exact model before they freeze headcount, pilot-zone approval, screen height, cable access, shared storage, receiving sequence and phased floor delivery. The goal is to keep the workstation quote tied to the actual seating plan, component list and release order instead of a generic open-office reference image that later forces the factory to rebuild the brief from screenshots or memory.

  • Dealers can build showroom or tender-ready workstation stories around repeatable team-floor modules, hero seat plans and branch top-up logic instead of isolated desk photos.
  • Importers can compare workstation mixes by exact module count, storage scope, room labels and destination route before asking about container planning.
  • Fit-out contractors and project buyers can map exact workstation modules to seating plans, BOQs, room labels, receiving limits and phased floor release notes before quotation revision starts.
  • Corporate buyers can separate pilot zones, departmental rollouts and later replenishment so one approved module does not get mistaken for automatic approval of every later floor or branch.
RFQ INPUTS

What buyers should confirm before quotation

  • Exact module model, seat count and whether the same floor mixes 2-person, 4-person or larger workstation clusters
  • Required screens, shared storage, cable access, power-routing notes, loose hardware packs and any optional accessories that still need written confirmation
  • Pilot zone, mockup cluster or approved sample module separated from later floors that may still have open layout or component questions
  • Room, department, zone, floor-plan reference or BOQ line kept on the same dated model list
  • Destination market, receiving point, phased delivery sequence, finish basis, installation handoff notes and target release timing

Send the module shortlist together with seat count, plan references, pilot-zone status, component scope, destination, receiving setup and floor-release timing so BG can quote a workstation package that matches the actual project route instead of rebuilding the seating brief from scattered screenshots, voice notes or message fragments.

Priority checks

Keep the workstations RFQ usable after the first quote.

These checks keep layout, component scope and later delivery control on the same sourcing trail so workstation, desk or storage pages do not stop being useful once quotation revision starts.

SEAT MAP

Keep module count, user positions, room labels and phase notes on one dated revision

  • Separate 2-person, 4-person and larger workstation modules instead of quoting only one total seat number
  • Keep department, floor, room labels and batch or phase notes attached to the same model list so phased delivery does not rebuild the seating plan from memory
  • Mark any still-open aisle width, orientation, return, power-pole or access questions as pending until the buyer confirms the latest layout basis
COMPONENT SCOPE

List screens, cable access, shared storage and hardware packs as controlled quotation items

  • State whether privacy screens, cable boxes, shared pedestals, side storage, divider accessories and loose hardware packs are included or optional
  • Do not let one showroom image stand in for unconfirmed component scope on a live workstation order
  • Keep finish basis, accessory notes and any sample-confirmation questions on the same active revision before sample, drawing or pricing approval moves forward
PILOT ZONE

Separate mockup or pilot-module approval from the wider rollout before quotation drift starts

  • State whether one workstation cluster is a pilot zone, showroom mockup or final live-order module before using it as the quotation basis for later floors
  • Keep approved pilot-module points separate from later-floor items that still need written confirmation for layout, screen height, cable routing or shared storage scope
  • Repeat the approved module list, visible finish basis and any still-open rollout differences on one dated control file before production or phased release moves forward
FLOOR RELEASE

Treat phased workstation delivery, receiving and closeout as part of the buying file

  • Repeat the approved module list, receiving point, floor sequence, room labels and staged handover note before shipment release
  • Keep future phases separate from true shortages so later installation changes do not distort the current batch record
  • Use the same dated model trail for shipment, room delivery, unpacking, missing-hardware review and corrective-support closeout
INSTALLATION FILE

Carry the same workstation trail into unloading, assembly and post-handover support

  • Keep carton labels, room references, hardware packs, screen brackets and assembly notes tied to the exact module list used for quotation and packing approval
  • Separate installation-sequence changes from true missing parts or visible-damage claims so site teams do not reopen the order from memory
  • Use one dated handover file for room delivery, assembly completion, open punch-list items and later replenishment or corrective-support questions
Verified model range

57 workstations models online.

Product facts come from BG catalogues and BG-controlled product pages. Unknown specifications are left for quotation confirmation rather than estimated. Start with the exact model reference, then keep category-specific guides, destination inputs and later delivery controls on one sourcing trail.

CATEGORY CLUSTER

Best next guides for workstations buyers

AFTER QUOTATION

Keep the same category trail through approval and delivery

FACTORY CONTEXT

Who publishes these workstations pages?

BG Office Furniture presents itself as a Foshan manufacturer. These category pages help buyers turn public model references into a cleaner quotation route; factory-area, staffing, material-standard and certification claims still require current official or written evidence.

Request a category quotation ↗

FAQ

Common workstations sourcing questions

Can one RFQ combine 2-person and 4-person workstation modules?

Yes. Buyers can keep the exact module list, quantities and room references on one RFQ so mixed workstation planning stays traceable.

What should a workstation buyer confirm before release?

Confirm the exact module count, seating layout, included screens and storage, cable-access requirement, finish basis, receiving point, room labels and phased delivery sequence before production release.

How should buyers treat one approved mockup or pilot workstation cluster?

Use the approved pilot cluster as a dated reference, but keep later floors, room labels, component changes and still-open layout points visible instead of assuming one mockup automatically approves the full rollout.

Can a dealer use these pages for showroom planning as well as projects?

Yes. Dealers can use the same model pages for showroom selection, repeat quotation and first-assortment planning, but should still keep component scope, seat count and destination questions on the written RFQ.

What should a buyer do when one workstation floor will release in phases?

Keep the approved module list, room labels, floor sequence, receiving point, hardware-pack logic and any still-open accessories on one dated control file so later phases do not get confused with shortages or specification changes.

Does the page show every engineering or installation detail?

No. Public model pages are for identification and sourcing direction. Detailed dimensions, accessories, drawings, packing and installation confirmation belong in the quotation, drawing and delivery-control stages.